As an expert pool guide, I understand the importance of maintaining the proper water level in your swimming pool. Unfortunately, it is common for pool owners to overlook the water level and find themselves dealing with a pool water level that is too high. In this article, I will explain why pool water levels can become too high, the potential problems this can cause, and simple steps to take to resolve the problem.
How to Fix a Pool Water Level That Is Too High?
As a pool contractor, I understand the importance of a pool’s water level staying within the correct range. If the water level is too high, it can cause major damage to your pool. Fortunately, there are several methods you can use to fix a pool water level that is too high.
Check the Pool Pump
The first thing to do is check the pool pump. If the pool pump is not working properly, it can cause the water level to rise. Make sure that the pump is turned on and that it is set to the correct speed. Additionally, check the filter to ensure that it is clean and that the water is flowing properly. If the pool pump isn’t working properly, it may need to be replaced or repaired.
Adjust the Water Level Valve
The next step is to adjust the water level valve. This valve is located near the bottom of the pool, and it can be used to control the water level. Adjust the valve so that it is slightly open and then slowly close it until the water level is just below the top of the pool.
Clean the Skimmer
The skimmer is another important component of the pool. It is responsible for removing debris from the pool. If the skimmer is clogged, it can cause the water level to rise. Make sure to clean the skimmer regularly to ensure that it is working properly.
Check the Pool Drain
The pool drain is responsible for draining the pool. If the drain is clogged, it can cause the water level to rise. Make sure to clean the drain regularly and check for any obstructions.
Add More Water
If all else fails, it may be necessary to add more water to the pool. Make sure to add the correct amount of water – adding too much can cause the water level to rise.
Hire a Professional
If you are unable to fix the pool water level yourself, it may be best to hire a professional. A professional will be able to properly diagnose the problem and provide the best solution.
Reasons Why Pool Water Level Is Too High
Overfilling
When filling the pool with water, it is important to avoid overfilling the pool. Overfilling can cause the water level to rise above the skimmer, which can cause a number of problems. For example, when the water is too high, the water pressure on the pump can increase, causing it to work harder. This can lead to damage to the pump and other components of the pool. Additionally, the pool may become unbalanced and the chemical levels may be thrown off, leading to cloudy and unhealthy pool water.
Rainfall
Rainfall can also cause the pool water level to rise. Rainwater can pool around the pool and eventually fill it, leading to an increase in the water level. Rainwater can also contain a variety of contaminants, such as leaves, pollen, and dirt, which can lead to a decrease in the quality of the water. Additionally, rainwater can be acidic, which can throw off the pH balance of the water and cause damage to the pool’s equipment.
Leaky Pool Equipment
Leaky pool equipment, such as the filter, skimmer, or pump, can also cause the water level to rise. If the pool equipment is not maintained correctly, water can leak out and lead to an increase in the water level. This can also lead to a decrease in the quality of the water and can cause damage to the pool’s equipment. Additionally, if the water is leaking out of the pool, the levels of chlorine and other chemicals in the pool can become unbalanced, leading to a decrease in the water quality.
Leaks From The Pool Surface
Leaks from the pool surface can also lead to an increase in the water level. If the pool surface is cracked, water can seep out and cause the water level to rise. This can also lead to a decrease in the water quality and can cause damage to the pool’s equipment. Additionally, if the pool surface is cracked, the pool may become unbalanced, leading to a decrease in the water quality.
Common Ask Questions
What is the problem?
The problem is that the water level in the swimming pool is too high.
What causes the water level to be too high?
The water level in the pool can become too high due to heavy rain, snowmelt, or a malfunctioning pool pump.
What steps should I take to lower the pool water level?
The first step is to determine how much the water level needs to be lowered. This can be done by measuring the water level with a yardstick or other measuring device. Once you know the desired water level, you can start to lower the water level in your pool. This can be done by using a pool pump to remove water from the pool or by using a garden hose to siphon water out of the pool.
What safety precautions should I take?
When dealing with pool water, it is important to take safety precautions to prevent the spread of contaminants and bacteria. Before lowering the pool water level, make sure to clean the pool with a pool vacuum or other cleaning tool. Additionally, use a dust mask and gloves when handling pool chemicals or pool pumps.
What should I do once the water level has been lowered?
Once the water level has been lowered to the desired level, you should check the pool filter and pump for any debris or blockages that could be preventing the water from circulating. Additionally, check the pool skimmer for any debris that needs to be removed. Finally, check the pool for any leaks or cracks that could be causing the water level to remain high.
Seasonal Pro Tip – Water Level Too High?
As a pool owner, I have learned the importance of keeping the pool water level at the proper height. Not only does it ensure the pool runs efficiently, but it also reduces the risk of any water damage to the pool structure. I have learned to take extra precautions and ensure I check the pool water level regularly to avoid any future costly repairs.
